Terabeam Wireless
Terabeam Wireless > Solutions > Network Optimizers > Amplifiers & Converters
Terabeam Wireless Solutions

Amplifiers and Converters

Search Site

Advanced Search

Solutions Links
Point to MultiPoint
Point to Point
Network Optimizers
WiMax
White Papers
 
Network Optimizers Links
Bandwidth
Control Unit
TurboCell®
AP+ Software
Wireless Cards
Antennas
Amplifiers

Get Adobe Acrobat ReaderHere is a list of the amplifiers and converters we carry. Please click on the product name to see the specification sheet for that product. All of the documents below are in Adobe Acrobat (PDF Document) format. If you do not have Adobe Acrobat, you can download it for free from Adobe. Click on the picture of the antenna to see a larger version.

If you cannot find the product sheet you are looking for here, it could be a discontinued product. We still have those specification sheets available online, for your convenience, on our Archived Specification sheet page.

Request more info on Amplifiers and Converters
Request more info on Amplifiers and Converters

Component Picture Description Part Number
AMP2440 A2408 2.4 GHz Antenna The Model AMP2440 is a 2.4 GHz waterproof bi-directional pole mounted amplifier. It is designed for use with 2.4 GHz Spread Spectrum radio modems and wireless LAN equipment. Consisting of a low noise receiver pre-amplifier and transmit power amplifier, the AMP2440 offers significant increases in operating range and performance. The unit is ideal for use with any 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum Wireless LAN devices or radio modems. When used with 24 dB gain grid dish antennas and the proper radios, ranges up to 50 miles (80 km) line-of-sight can be achieved! 301-900001-001
AMP2440-Indoor A2408 2.4 GHz Antenna The Model AMP2440-I is a bi-directional one-piece amplifier for use with 2.4 GHz Spread Spectrum radio modem and wireless LAN equipment. Consisting of a low noise receiver pre-amplifier and transmit power amplifier, the AMP2440-I offers significant increases in operating range and performance. The unit is ideal for use with 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum radio modems and Wireless LAN devices. This version of the amplifier is ideal for use in any application where the total cable length from the radio coax to the antenna is short, but amplification is needed. 301-900002-001
AMP2441 A2408 2.4 GHz Antenna The Model AMP2441 is a 1 Watt, 2.4 GHz waterproof bidirectional pole mounted amplifier for use with Spread Spectrum radio modems and wireless LAN equipment. Consisting of a low noise receiver pre-amplifier and transmit power amplifier, the AMP2440 offers significant increases in operating range and performance. The unit is ideal for use with any 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum Wireless LAN devices or radio modems. When used with 24 dB gain grid dish antennas, ranges up to 50 miles (80 km) line-ofsight can be achieved! 301-900004-001
AMP2441-Indoor A2408 2.4 GHz Antenna The Model AMP2441-I is a bi-directional one-piece amplifier for use with 2.4 GHz Spread Spectrum radio modem and wireless LAN equipment. Consisting of a low noise receiver pre-amplifier and transmit power amplifier, the AMP2441-I offers significant increases in operating range and performance. The unit is ideal for use with 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum radio modems and Wireless LAN devices. This version of the amplifier is ideal for use in any application where the total cable length from the radio coax to the antenna is short, but amplification is needed. 301-900006-001
CA2458 A2408 2.4 GHz Antenna The CA 2458 is a pole mounted, bi-directional frequency translator and amplifier that enables any 2.4 GHz Spread Spectrum radio to operate in the 5.8 GHz band. The converter is completely transparent to the user. In normal operation, the converter up-converts the 2.4 GHz radio to the 5.8 GHz band (during transmit), and down converts 5.8 GHz to 2.4 GHz on receive. No user adjustment, configuration or provisioning is required. The CA2458 may be used to replace an existing Terabeam Wireless AMP 2440 amplifier (requires new antenna and DC injector), and will provide relief from the congestion in the 2.4 GHz band. The same coax cable may be used between the DC injector and converter as is used with the AMP2440 amplifier. 303-900000-001

Request more info on Amplifiers and Converters
Request more info on Amplifiers and Converters


^^ Back to the top. ^^

Related Products

Return to the Solutions page or the Network Optimizers page.