Antennas

Here is a list of the Antennas we carry. Please click on the antenna name to see the specification sheet for that antenna. All of the documents below are in Adobe Acrobat (PDF Document) format. If you do not have Adobe Acrobat, you can download it for free from Adobe. Click on the picture of the antenna to see a larger version.

If you cannot find the product sheet you are looking for here, it could be a discontinued product. We still have those specification sheets available online, for your convenience, on our Archived Specification sheet page.

Request more info on Antenna Product Line

2.4 GHz Antennas

Antenna	Picture	Description	Part Number
A2408		Heavy duty white UV inhibited omni-directional fiberglass radome sealed outdoor vertical antenna with copper elements, 8 dBi gain, 2.4 - 2.5 GHz frequency range, 16” tall, 25° vertical beamwidth	203-900009-001
A2412-O & A2412-D		Heavy duty white UV inhibited omni-directional fiberglass radome sealed outdoor vertical antenna with copper elements, 12 dBi gain, 2.4 - 2.485 GHz frequency range, 5' 5" long, 5° vertical beamwidth, no downtilt (A2412-O) or 3° downtilt (A2412-D)	203-900003-001 (A2412-O)
			203-900004-001 (A2412-D)
HP90-13 & HP90-16		The HP90 series antennas 90° base station sector antennas. The HP90 is used for 2.4 GHz systems. Model -13 has a 13dBi gain and the -16 has 16dBi gain. They are designed especially for use at Wireless Internet Point of Presence (WIPOP) base sites and provide segmented coverage over a selected area. Since these antennas are horizontally polarized, they offer as much as 20 dB or more isolation from systems in the area that use vertically polarized antennas. Includes tilt - mount bracket, with N-Female termination.	203-900016-001 (HP90-13)
			203-900017-001 (HP90-16)
LP14		The Model A2.45LP14 is a 2.4 GHz vertically polarized sector antenna designed primarily for use at Wireless Internet Point of Presence (WIPOP) base sites. It is used to provide segmented coverage over a selected area and features a 180° horizontal beamwidth. It offers higher gain than omni antenna. Its integrated downtilt bracket enables the main beamwidth to be aimed downward when installed on a mountain top, tall radio tower or building. This downtilt feature offers maximum signal strength for both reception and transmission in the desired area. A2.45LP14 has 14.2 dBi gain, 180º horizontal and 9º vertical beamwidths and includes tilt mount bracket.	203-900010-001
LP17		The Model A2.45LP17 is a 2.4 GHz long panel antenna designed primarily for use at Wireless Internet Point of Presence (WIPOP) base sites to provide segmented coverage over a selected area. The antenna features a 90° horizontal beamwidth. It also has a tilt down bracket to focus the signal downward when installed on a mountain top, tall radio tower or building. It is ideal when setting up multiple WIPOP cell sites since the size of the cell is easily set based on the down-tilt of the antenna. A2.45LP17 is a 2.4 GHz sector antenna, 17 dBi gain and 7.5º vertical beamwidths.	203-900011-001
FP12 & FP18		A2.45FP12 panel antenna, ideal for 2.4 GHz Spread Spectrum radios, WCS, and MMDS systems, 12 dBi gain, rugged outdoor construction, high impact UV stabilized plastic, 7” x 7” x 1”	203-900007-001
		A2.45FP18 panel antenna, ideal for 2.4 GHz Spread Spectrum radios, WCS, and MMDS systems, 18 dBi gain, rugged outdoor construction, high impact UV stabilized plastic, 14” x14” x 1”	203-900008-001
PT2424		Grid Dish Antenna offering high gain for reliable long-range wireless data communication at an economical price, integrated grill style reflectors and a feed element with a lead-in cable terminated in an NMale connector, 24 dBi gain, 32" tall, 27" wide, 10° beamwidth, with 24" lead-in cable.	203-900001-001
VP120-11 & VP120-14		VP120-11 & VP120-14 are both MMDS/ISM Sector Antennas with 120° Beamwidth and optional 15° mechanical downtilt. They are both easily installed with a lightweight and rugged flat panel design that offers low windloads. The standard antenna mount accommodates a 2.5'' to 4.5'' diameter pipe. Both have a frequency range of 2.4 GHz to 2.7 GHz, 25 dB cross-polarization rejection, >25 dB front/back ratio, and 1.5:1 VSWR. The VP120-11 has 11 dBi Gain and 16° vertical beamwidth. The VP120-14 has 14 dBi gain and 8° vertical beamwidth.	203-925120-011 (VP120-11) 203-925120-014 (VP120-14)

Jump to the 2.4 GHz Antennas or 5.8 GHz Antennas.

Request more info on Antenna Product Line

4.9 GHz Antennas

Antenna	Picture	Description	Part Number
A4910		The A4910 is an weatherproof, omnidirectional antenna with high impact polycarbonate radome, an operating range of 4.940 - 4.990 GHz, 10 dBi gain, vertical polerization and 6° beamwidth. Mounting hardware included. N-female connector.	206-100310
A4.9-2'-R-G, A4.9-2.5'-R-G, & A4.9-4'-R-G		2 ft, 2.5 ft, and 4 ft dish antenna in the 4.940 - 4.990 GHz operating range that comes with a factory installed radome (optional with the A4.9-4'-R-G). They also come with an N-Type Female Connector and a Galvanized steel back mount for 1.9-4.5" O.D. 2 ft Antenna: 27.7 dBi gain, 7° beamwidth, 35 dB front to back ratio; 2.5 ft Antenna: 29.7 dBi gain, 5.6° beamwidth, 38 dB front to back ratio; 4 ft Antenna: 33.7 dBi gain, 3.5° beamwidth, 42 dB front to back ratio	206-100120 (2') 206-100125 (2.5') 206-100140 (4')

Jump to the 2.4 GHz Antennas.

Request more info on Antenna Product Line

5.8 GHz Antennas

Antenna	Picture	Description	Part Number
A5.3FP23-M		A5.3FP23-M is a heavy duty weatherproof antenna made with a high impact polycarbonate radome. It has 23 dBi gain, 5.150 - 5.875 GHz frequency range, 9° vertical or horizontal beamwidth, and is ideal for use with the EX-1, TeraBridge™ 5345/5845, CA2458 and other 5.3/5.8 GHz ISM radios. It is 12" x 12" x 1.5"	203-900009-001
A5.8-2'-G, A5.8-2.5'-G, & A5.8-4'-G		2 ft, 2.5 ft, and 4 ft dish antenna in the 5.250 - 5.850 GHz operating range that comes with a factory installed radome (optional with the A5.8-4'-G). 2 ft Antenna: 28.5 dBi gain, 5.6° beamwidth, 35 dB front to back ratio; 2.5 ft Antenna: 31.2 dBi gain, 4.4° beamwidth, 38 dB front to back ratio; 4 ft Antenna: 34.8 dBi gain, 2.7° beamwidth, 42 dB front to back ratio	204-100001 (2') 204-100018 (2.5') 204-100003 (4')
A5.8HP90-16		The HP90 series antennas 90° base station sector antennas. The A5.8HP90-16 is used for 5.8 GHz systems and has 16 dBi gain. It is designed especially for use at Wireless Internet Point of Presence (WIPOP) base sites and provide segmented coverage over a selected area. Since this antenna is horizontally polarized, it offers as much as 20 dB or more isolation from systems in the area that use vertically polarized antennas. Includes tilt - mount bracket, with N-Female termination.	204-100017
A5808		Heavy duty white UV inhibited omni-directional fiberglass radome sealed outdoor vertical antenna with copper elements. A5808 has 8 dBi gain, 5.725 - 5.925 GHz frequency range, 35° vertical beamwidth, and is 20" tall and 1.35" in diameter.	204-100020-008
A5814		Heavy duty white UV inhibited omni-directional fiberglass radome sealed outdoor vertical antenna with copper elements. A5814 has 14 dBi gain, 5.725 - 5.850 GHz frequency range, 8° vertical beamwidth and is 30" tall and 1.35" in diameter	204-100020-014

Jump to the 2.4 GHz Antennas, 4.9 GHz Antennas or 5.8 GHz Antennas.

Request more info on Antenna Product Line

Related Products

• Bandwidth Control Unit
• Software
  • TurboCell®
  • AP+ Software
• Wireless Cards (listing coming soon)
• Amplifiers

Return to the Solutions page or the Network Optimizers page.

home | customers | solutions | corporate | news | support | partners | contact us