 Key Features
- Ideal for use in campus environments and 802.11b Hot Spots
- Remotely manageable and SNMP compliant via the
Terabeam Configurator
- Up to 4.5 Mbps actual throughput
- Protects against access by unauthorized stations via
an Access Control Table or MAC authentication via a
RADIUS Server
Description
The Terabeam Wireless AP Ant and the AP Ant-LR are 802.11b Access
Points built into 18 dBi flat panel antennas. Both products are identical in features except that the AP Ant-LR has the world famous Terabeam Wireless bi-directional amplifier built in for maximum range!
They are ideal for providing coverage over a focused area, such as 802.11b Hot
Spots, hotels, airports, apartment buildings, etc. They are easy to install and the
benefits of a high-gain directional antenna are achieved without the
need for fragile RF adapter cables or bulky coax cables. The only
connection to the AP Ant and the AP Ant-LR is a thin, flexible
outdoor-rated Ethernet cable (sold separately)! Because the radio is in the antenna, there are no coax cable signal
losses as you would have using an access
point with an external antenna.
Two versions of the AP Ant are available: the standard series AP Ant with an integral 18 dBi gain flat panel antenna, and the AP Ant-LR with the addition of an integrated bi-directional fixed amplifier to boost range and improve reception. The WLAN device located in the antenna gets its power from the DC Power Injector which puts DC power onto the Ethernet cable. Also, because the radio is in the antenna, there is no coax cable loss! Up to 300 feet of Ethernet cable between the DC injector and the antenna can be used with no signal loss. Just plug the outdoor Ethernet cable (ordered separately) into the Cat 5 DC Injector, and then into the PC or Router, and you're done! Since it is FCC certified for nonprofessional installation, it is legal for the customer to do self-installation.
Full List of Features
- 802.11b Compatible
- Remotely manageable and SNMP compliant via the Terabeam Configurator
- Windows-based Configuration Software
- Protects against access by unauthorized stations via an Access Control Table or MAC authentication via a RADIUS
Server
- Easy-to-run outdoor-rated Ethernet cable available (can be optionally extended up to 100
feet for the AP Ant and up to 50 feet for the AP Ant-LR)
- Ideal for use in campus environments and 802.11b Hot Spots
- Weatherproof: designed and rated for outdoor use
- Provides extended range coverage by focusing the radio signal
- Lightweight and thin, just one inch thick and 14 inches square
- Flat panel antenna offers 18 dBi gain and 18° beamwidth
- Can be mounted in either vertical or horizontal polarization
- Transmit power of 2 Watts EIRP for the AP Ant;
Transmit power of 16 Watts EIRP for the AP Ant-LR
- Up to 4.5 Mbps actual throughput
- No bulky RF cables from Access Point to antenna
- System is optimized to provide for the maximum possible range without having to worry about coax cable loss
- FCC Part 15 certified for license-free operation (11 channels in
USA)
- Professional installation is not required by FCC Part 15 rules
- No need for fragile RF adapter cables
- Operating temperature range: -20°C to +50°C
Includes
- FP 18 dBi antenna with built-in Access Point
- Sturdy steel wall/mast tilt-bracket mount
- CAT 5 DC power injector.
- 110/220 VAC to 48 VDC Power Supply
- CD-ROM with Windows-based software and documentation
Documentation  All
of the documents below are in Adobe Acrobat ( PDF Document)
format. If you do not have Adobe Acrobat, you can download
it for free from Adobe.
Purchasing Information
Part Number: 603-900060-201 (AP Ant Kit, no cable), 603-900060-301 (AP Ant-LR Kit, no cable)
Toll Free Number: (888) 297-9090
Related Products
Get the most out of our products by enhancing them with our network optimizers! Learn more about those products:
Return to the Solutions page
or the TeraStar™ (802.11 Products) page.
home | customers | solutions | corporate | news | support | partners | contact
us |
