|
 Key Features
- Password-based Security
- Adaptive Dynamic Polling
- Bandwidth Control/Data Rate Throttling
- SuperPacket Aggregation
- Solution for Hidden Node Problem
- Continuous Signal Quality Monitoring
Description
The TurboCell® Integrated EtherAnt Turbo is a powerful, FCC certified unit
that offers the lowest entry price for a point-to-multipoint (P-MP) outdoor
wireless equipment. It is designed for the residential market as a cost-optimized
solution, and is the client side of a wireless P-MP network. The
EtherAnt Turbo supports 1 to 5 wired users and features the award-winning
industry standard TurboCell® software, a protocol which significantly
enhances the performance of outdoor 802.11b systems through the use of
adaptive dynamic polling, bandwidth allocation at the client, and packet
aggregation. TurboCell® solves the hidden node problem inherent in
adding nodes to outdoor networks. This all-in-one unit includes
Terabeam's advanced chip set, an embedded 18 dBi antenna, and a 2.4
GHz radio. Because of its outstanding feature set and affordable price, the
EtherAnt Turbo provides the best value in the outdoor wireless industry.
And it also supports your existing TurboCell® installations, saving you the
need to reinvest in costly software. This series of solutions is backward
compatible with:
- Orinoco COR/ROR/ORC products from Proxim, Lucent or Avaya
- KB10 products from Karlnet
- AP-Ant and RG-Ant with TurboCell® load from YDI
The EtherAnt Turbo features true plug-and-play installation, allowing for
rapid and scalable deployments! With the EtherAnt Turbo you don't have
to worry about complicated client installations, no more worrying about
driver conflicts with various OS, and, best of all, you don't have to open up
the customer's computer! Simply plug the EtherAnt Turbo directly into the
client computer's Ethernet adapter and you are ready to go.
Two versions of the EtherAnt Turbo are available: the standard series
EtherAnt Turbo with an integral 18 dBi gain flat panel antenna, and the
EtherAnt Turbo-LR with the addition of an integrated bi-directional fixed
amplifier to boost range and improve reception. The WLAN device located
in the antenna gets its power from the DC Power Injector which puts DC
power onto the Ethernet cable. Also, because the radio is in the antenna,
there is no coax cable loss! Up to 300 feet of
Ethernet cable between the DC injector and the antenna can be used with
no signal loss. Just plug the outdoor Ethernet cable (ordered separately)
into the Cat 5 DC Injector, and then into the PC or Router, and you're done!
Since it is FCC certified for nonprofessional installation, it is legal for the
customer to do self-installation!
NOTE: The EtherAnt Turbo can associate only to Base stations that run TurboCell® software. It does not work with 802.11b AP's.
EtherAnt Turbo Kit Includes
- Flat panel antenna with WLAN device built-in
- Sturdy steel wall/mast tilt-bracket mount
- Cat 5 DC Power injector
- 110/220 VAC TO 48 VDC Power Supply
- CD-ROM with Windows-based software and documentation
Documentation
 All
of the documents below are in Adobe Acrobat ( PDF
Document) format. If you do not have Adobe Acrobat, you can download
it for free from Adobe.
Purchasing Information
Part Number: 603-900050-201 (TeraStar™ EtherAnt Turbo Kit, no cable),
603-900050-301 (TeraStar™ EtherAnt Turbo-LR Kit, no cable)
Toll Free Number: (888) 297-9090
Related Products
Return to the Solutions page or the TeraStar™ Turbo page.
home | customers | solutions | corporate | news | support | partners | contact
us |
