Terabeam Wireless
Terabeam Wireless > Solutions > Point to Point > TeraBridge™ > EX1
Terabeam Wireless Solutions

TeraBridge™ EX1

5.8 GHz BackHaul Bridge Solution from Terabeam Wireless

Search Site

Advanced Search

Solutions Links
Point to MultiPoint
Point to Point
Network Optimizers
WiMax
White Papers
Point to Point
Solutions Links
TeraStar™ Turbo
TeraMax™
TeraBridge™
GigaLink®
TeraOptic™ FSO
TeraBridge™ Product Links
5345/5845
2445
EX1-Link
4XE-Link
Request more info on TeraBridge EX1
Request more info on TeraBridge EX1

Features

  • Bridges 10 Base-T Ethernet LANs
  • Totally transparent, passes all protocols
  • 8 Mbps full duplex typical throughput (16 Mbps aggregate)
  • Latency less then one msec
  • Operates in a license-free UNII band
  • Radio mounts right at antenna for virtually no cable loss
  • Easy to install, easy to configure
  • User adjustable transmit output power
  • Received Signal Strength Indicator (RSSI) output on a BNC jack on rear panel
  • Configuration DIP switch settable
  • Eight user selectable channels available
  • All weather outdoor enclosure
  • Works with all 5.3/5.8 GHz directional antennas
  • Can be used with vertical or horizontal polarized antennas
  • Ideal for use as a WIPOP backbone link (Keeps 2.4 GHz radio channels clear)

Description

The TeraBridge™ EX1 (previously EX-1) is a license-free digital microwave radio that provides cost-effective, wireless point-to-point Ethernet bridging. It operates on the Unlicensed National Information Infrastructure frequency spectrum (UNII). The EX1 Ethernet Bridge offers 8 Mbps full duplex throughput (16 Mbps aggregate) on eight frequency channels that are user selectable. The system is FCC Certified for license-free operation with 1 foot and 2 foot antennas.

The EX1 provides full-duplex operation in the 5.3/5.7 GHz frequency bands in accordance with the FCC Rules part 15.407. The EX1-Link requires no special tuning or adjustments at the site; just install, align and connect to the existing LAN infrastructure via the 10Base-T interface and the unit is up and transmitting data. This product is ideal for providing a high speed wireless backbone to Wireless Internet POPs (WIPOP). Line-of-sight path distances up to 7 miles or more in the U.S.A. are possible. Internationally, over 30 km with higher gain dish antennas can be achieved.

Includes

  • 1 each 5.3 GHz TX/5.7 GHz RX outdoor radio
  • 1 each 5.7 GHz TX/5.3 GHz RX outdoor radio
  • 2 each RF jumper cable from radio to the antenna
  • 110/220 VAC Power Supply
  • DC Power Injector (to be used with single Data/Power cable version)
  • 1 each Installation Manual
  • 2 each 5.3 - 5.8 GHz antennas

Documentation

Get Adobe Acrobat ReaderAll of the documents below are in Adobe Acrobat (PDF Document) format. If you do not have Adobe Acrobat, you can download it for free from Adobe.

Purchasing Information

Part Number: 604-900004-001 (EX1-Link)

Toll Free Number: (888) 297-9090

Request more info on TeraBridge EX1
Request more info on TeraBridge EX1

Related Products

Return to the Solutions page, the Point to Point Solutions page or the TeraBridge™ page.