- My EC keeps locking up and I need to cycle the DC power to it to bring it back. What is wrong?
- There were a number of bugs discovered that would cause behavior such as this under certain circumstances. To solve this problem, you need to upgrade …
Last Updated: 08/23/2004 05:23 PM
- What is the Micro-routing feature built into the EC?
- The EC can support up to 253 Class "C" IP devices through a process called micro-routing. The algorithm maintains an auto-indexed IP to MAC address ta …
Last Updated: 08/23/2004 05:23 PM
- What do I need to do to flash upgrade the EC?
- First off, check your current version. If it is 2.3 and earlier, then you will need to make sure the IP subnet of your computer matches the IP subnet …
Last Updated: 08/23/2004 05:23 PM
- Why can I not log on Bridge/Client Manager?
- Only one Bridge/Client Manager Login is allowed at a time. The manager program will not allow two users to log on simultaneously. …
Last Updated: 08/23/2004 05:23 PM
- Why does my EC seem to reduce its transfer speed sometimes?
- Transfer Speed is reduced when the Bridge/Client Manager is logged into an EC (approx. 25%). You should not leave the manager program logged in contin …
Last Updated: 08/23/2004 05:23 PM
- The settings of a Profile do not match what I previously entered.
- If multiple ECs contain the same Profile Name, but different Profile settings, the Bridge/Client Manager will inherit the settings of the last EC to w …
Last Updated: 08/23/2004 05:23 PM
- Why do I lose my WEP keys?
- Previously stored WEP keys will be lost when re-configuring an EC (via any wizard). …
Last Updated: 08/23/2004 05:23 PM
- I'm entering information in a field of the Bridge/Client Manager and the program does not recognize it. What's wrong?
- When entering information into the various fields of the Bridge/Client Manager, be aware that those fields are case-sensitive (upper/lower-case). …
Last Updated: 08/23/2004 05:23 PM
- The changes I implemented to my EC configuration do not show.
- Any changes made to the configuration of an EC will not be stored in the EC until you save the changes using the 'Save Settings' button. …
Last Updated: 08/23/2004 05:23 PM
- How long does it take to an EC to re-associate with a new Access Point (or Wireless Link)?
- The EC may take up to 15 seconds to automatically scan and re-associate with a new Access Point (or Wireless Link) when the primary association has be …
Last Updated: 08/23/2004 05:23 PM
- How many devices can be attached to the EC if I use the "Dynamic MAC Address" selection?
- When configuring an EC to use Dynamic MAC Address, make sure that only one device is attached to the Ethernet port (RJ45). There are very few instanc …
Last Updated: 08/23/2004 05:23 PM
- What happens if a targeted AP (or Partner) is not discovered?
- When configured for Infrastructure mode (or Wireless Bridge mode), if the targeted AP (or Partner) is not discovered the EC will revert to Peer Group …
Last Updated: 08/23/2004 05:23 PM
- Why do my client devices keep wandering off for Access Points?
- When configuring your APs with the Orinoco AP Manager, under the "Wireless Interface -> Advanced" tab there is a parameter called "Distance Between AP …
Last Updated: 08/23/2004 05:23 PM
- Bridge/Client Manager scans for EC's and when it finds one and I select it, by using the Select button or double-clicking on it, instead of opening the main window it starts scanning for EC's again repeating this cycle indefinitely. What's wrong?
- There are several possible causes for this. First, the Bridge/Client Manager uses both UDP and TCP to connect to the EA, so if there is anything on th …
Last Updated: 08/23/2004 05:23 PM
- When I log in on my system management station under Windows 2000 (or XP) and I start Bridge/Client Manager v3.10 I get the error message: "Failed to log on". This didn't happen with previous versions of the program. What's wrong?
- The latest version of the Bridge/Client Manager (v3.10) incorporates an automatic ARP Table Entry kernel system call to speed-up the connection proces …
Last Updated: 08/23/2004 05:23 PM
- I'm running Bridge/Client Manager on a Windows XP computer. Initially it has been working fine but with time it stops scanning for EC's. What's the problem?
- Check if you have a third-party application add-on called "Deterministic Network Enhancer" installed under Windows XP. Its purpose is to filter Ethern …
Last Updated: 08/23/2004 05:23 PM
- I have an EtherAnt-II mounted on the same mast as a TV antenna. When I operate the unit, lines appear in my TV set. How can I fix this?
- The only way is to move the EtherAnt-II away from the TV antenna since the electronics in the device are emitting weak spurious signals that the TV an …
Last Updated: 08/23/2004 05:23 PM
Return to the Support page or return to the FAQ page
home | customers | solutions | corporate | news | support | partners | contact us
|
